Anyone who has ever owned a laptop or other electronic device knows that whatever you do, you should not let it come into contact with water, especially a large quantity of it. With laptops, water is usually spilled on the keyboard due to the misplacement of a drink or by knocking it over. The problem is not with the water itself, but with the electricity running through the device at the time the liquid is spilled. It is the combination of the two that does the damage to the motherboard, not the simple act of spilling water on it. During the manufacturing process, circuit boards like this are washed in clean water to remove anything from their surfaces before they are packaged and shipped. However, if you need to clean off your motherboard on your desktop or your laptop due to a collection of dust or spilling anything, you should use rubbing alcohol, not water.
As with your response to water coming into contact with any electronic device, it should be immediate.
As soon as it happens, you should turn the laptop upside down, remove the A/C cord, and remove the battery. Turning the laptop upside down serves to let the excess liquid drain out of it and you should do this until it stops dripping out. Proceed to dry off the outside of the laptop with a cloth or paper towels after this.
As long as you disconnect the power source as soon as possible and allow the device to dry out completely, it should be fine. Do not try to power on the device before you are certain that it is completely dry on the inside. Of course, this is only if you have only spilled water on it, not if you have spilled an acidic beverage such as cola or coffee onto it. This will require some extra steps to take care of and may require that you take the laptop apart.
If you think you may have to have it taken apart to clean the cola or coffee off of the circuit board on the inside, then you may want to consider having it taken to a computer repair shop. It will cost a little money, but unless you are familiar with electronics and really feel that you know what you are doing, this is your best option. They will make sure that your laptop is in working order, as long as you made sure that the liquid did not assist in frying the motherboard.
Thursday, January 31, 2008
Stopping Mold Growth in the Bathroom
If you live in an older home, the probability that mold exists somewhere in your bathroom is pretty high, especially if the floor or walls are damaged in any way. Most people do not realize how hazardous mold can be to their health and do not go looking for mold in their homes when they really should. It can exist in several different areas, but the bathroom tends to be one of the best places to find it in large quantities since this room is naturally moist and large amounts of water travel in and out of it every single day.
There are a number of things that you can do to help prevent mold growth in your bathroom and most of them do not require much effort or money to be effective. One of the first things that you need to do is make sure that the entire floor of your bathroom is waterproofed. Whether you have tile, linoleum, marble, or anything else on the floor, it should be completely water tight to stop water from getting to the floor joists underneath. Water damage affects many bathroom floors across the country and the last time you want to happen while you are in the bathroom is the floor collapsing out from under you. The areas directly around the bathtub and toilet are particularly at risk, since both of these items can and commonly do overflow.
Something else you should worry about is the condition of the drywall on the ceiling. The steam created by hot water in the tub or shower is absorbed by this drywall on a regular basis if it remains trapped in the bathroom and is not allowed to escape to the outside of the house. Not only can this cause mold growth on the upper walls and ceiling, but it can also cause the drywall to buckle and collapse on you. The best way to let it out is either through a window or by installing an exhaust vent, which most building codes require be in the bathroom. You should have at least one of these two things in the bathroom, if not both. Leaving the window open for steam to escape may not always be practical due to bad weather outside.
The last thing that you need to do is keep a check on the plumbing around the toilet and under the sink. The toilet should not clog up and overflow often; if it does, you should have the lines checked by a professional.
There are a number of things that you can do to help prevent mold growth in your bathroom and most of them do not require much effort or money to be effective. One of the first things that you need to do is make sure that the entire floor of your bathroom is waterproofed. Whether you have tile, linoleum, marble, or anything else on the floor, it should be completely water tight to stop water from getting to the floor joists underneath. Water damage affects many bathroom floors across the country and the last time you want to happen while you are in the bathroom is the floor collapsing out from under you. The areas directly around the bathtub and toilet are particularly at risk, since both of these items can and commonly do overflow.
Something else you should worry about is the condition of the drywall on the ceiling. The steam created by hot water in the tub or shower is absorbed by this drywall on a regular basis if it remains trapped in the bathroom and is not allowed to escape to the outside of the house. Not only can this cause mold growth on the upper walls and ceiling, but it can also cause the drywall to buckle and collapse on you. The best way to let it out is either through a window or by installing an exhaust vent, which most building codes require be in the bathroom. You should have at least one of these two things in the bathroom, if not both. Leaving the window open for steam to escape may not always be practical due to bad weather outside.
The last thing that you need to do is keep a check on the plumbing around the toilet and under the sink. The toilet should not clog up and overflow often; if it does, you should have the lines checked by a professional.
Saving Up Water and Other Supplies For Hurricanes
The most important thing that you need to worry about if you plan on sticking out a hurricane in your home instead of evacuating is just how much clean water you have to drink. If you live alone and there will be no one staying with you, it will be a lot easier for you to prepare to stay at home during the storm, but if you have a family that will stay with you, you will have to gather a lot more supplies. You should also have a good supply of non-perishable food (preferably foods that you do not have to cook and are ready to eat out of the package), batteries for anything you think you will need, flashlights, a hand-crank radio, and blankets.
The hand-crank radio will ensure that you have the capability to hear what is going on in the outside world during the storm, even if your electricity does go out. This will let you know what your local, state, and federal government is doing at this time.
As far as your water supply, if you have just moved to an area that is prone to hurricane damage, you should start saving up water as soon as you get moved into your new home. You can do this by re-using milk jugs after you have rinsed them out and storing them in a safe, convenient place in your home. You should keep at least one gallon for yourself and for each person you will have with you during the storm to use each day you expect the storm to last. Saving up a week’s worth of water in this way is advised and will ensure that you do not run out of water.
While the storm rages outside, do not drink water from your faucet because of the fact that it may be contaminated with anything from bacteria, sea water, and leaves to sewage and other hazardous waste. You can boil water from your faucet if you run out of the supply that you have saved, but it is much better to make sure that you have enough water put back so that you do not have to do this. Boiling water does not remove all impurities or harmful materials, especially if it has been contaminated with chemicals.
You can also buy some water purification tablets from some department and outdoor supply stores. Anyone who hikes or camps purchases these if they plan on going into an area of wilderness where clean water is not always able to be obtained.
The hand-crank radio will ensure that you have the capability to hear what is going on in the outside world during the storm, even if your electricity does go out. This will let you know what your local, state, and federal government is doing at this time.
As far as your water supply, if you have just moved to an area that is prone to hurricane damage, you should start saving up water as soon as you get moved into your new home. You can do this by re-using milk jugs after you have rinsed them out and storing them in a safe, convenient place in your home. You should keep at least one gallon for yourself and for each person you will have with you during the storm to use each day you expect the storm to last. Saving up a week’s worth of water in this way is advised and will ensure that you do not run out of water.
While the storm rages outside, do not drink water from your faucet because of the fact that it may be contaminated with anything from bacteria, sea water, and leaves to sewage and other hazardous waste. You can boil water from your faucet if you run out of the supply that you have saved, but it is much better to make sure that you have enough water put back so that you do not have to do this. Boiling water does not remove all impurities or harmful materials, especially if it has been contaminated with chemicals.
You can also buy some water purification tablets from some department and outdoor supply stores. Anyone who hikes or camps purchases these if they plan on going into an area of wilderness where clean water is not always able to be obtained.
Subscribe to:
Posts (Atom)
